Hitachi CP-WU8440 Guía Del Usuario

50

INPUT menu

INPUT menu

From the INPUT menu, items shown in the table 
below can be performed.
Select an item using the ▲/▼ cursor buttons, and 
press the ► cursor button or ENTER button to 
execute the item. Then perform it according to the 
following table.

Using the ▲/▼ buttons switches the progress mode.

TV Ù FILM Ù OFF

  

• This function works only for a video signal, s-video signal, component 

video signal (of 480i@60 or 576i@50 or 1080i@50/60) and an HDMI

TM

 

signal (of 480i@60 or 576i@50 or 1080i@50/60).

• When TV or FILM is selected, the screen image will be sharp. 

FILM adapts to the 2-3 Pull-Down conversion system. But these 

may cause a certain defect (for example, jagged line) of the picture 

for a quick moving object. In such a case, please select OFF, even 

though the screen image may lose sharpness.

Using the ▲/▼ buttons switches the noise reduction mode.

HIGH Ù MID Ù LOW

   

• This function works only for a video signal, s-video signal, 

component video signal (of 480i@60 or 576i@50 or 1080i@50/60) 

and an HDMI

TM

 signal (of 480i@60 or 576i@50 or 1080i@50/60). 

Using the ▲/▼ buttons switches the mode for color space.

AUTO Ù RGB Ù SMPTE240 Ù REC709 Ù REC601

      
• This item can be selected only for a computer signal (except for 

signals from the LAN, USB TYPE A and USB TYPE B ports) or a 

component video signal (except SCART RGB).

• The AUTO mode automatically selects the optimum mode.

• The AUTO operation may not work well at some signals. In such a 

case, it might be good to select a suitable mode except AUTO.

Using the ▲/▼ buttons switches the function of the COMPONENT 

ports.

COMPONENT Ù SCART RGB

When the SCART RGB is selected, the COMPONENT (Y, Cb/
Pb, Cr/Pr)

 and VIDEO ports will function as a SCART RGB port. 

A SCART adapter or SCART cable is required for a SCART RGB 

input to the projector. For details, contact your dealer.

(continued on next page)