Hitachi CP-WU8440 Guía Del Usuario

60

SCREEN menu

This item allows you to capture an image for use as a MyScreen 

image which can be used as the BLANK screen and START UP 

screen. Display the image you want to capture before executing the 

following procedure.
(1)  Selecting this item displays a dialog 

titled “MyScreen”. It will ask you if 

you start capturing an image from 

the current screen.

Please wait for the target image to be displayed, and press 

the ENTER or INPUT button when the image is displayed. The 

image will freeze and the frame for capturing will appear. 

To stop performing, press the RESET button on the remote 

control. 

(2)  Using the ▲/▼/◄/► buttons adjusts 

the frame position. 

Please move the frame to the position 

of the image which you want to use. 

The frame may not be able to be 

moved for some input signals. 

To start registration, press the ENTER 

or INPUT button on the remote control.

To restore the screen and return to the previous dialog, press the 
RESET

 button on the remote control. 

Registration may take several minutes. 

When the registration is completed, the registered screen and 

the following message is displayed for several seconds:

If the registration failed, the following message is displayed:

• This function cannot be selected when the ON is selected to the 

MyScreen Lock item (

61).

• This function cannot be selected when the ON is selected to the 

MyScreen PASSWORD item in SECURITY menu (

88).

• This function is unavailable for a signal from the LAN, USB TYPE 
A / B

 or HDMI 1 / 2 port.

• Drawing with Drawing function cannot be captured (

104).

(continued on next page)