Canon MP390 Guía Del Usuario
98
Sending Faxes
Chapter 10
X Sending Methods
There are two methods of sending faxes:
• Sending from your machine (memory sending)
• Sending from your computer (See Software Guide)
This section explains how to use these methods.
• Sending from your machine (memory sending)
• Sending from your computer (See Software Guide)
This section explains how to use these methods.
Sending From Your Machine (Memory Sending)
Follow this procedure:
Sending Faxes From Your Computer
With your machine connected to your computer, you can send faxes from the computer. For details,
see Software Guide.
see Software Guide.
1
Load the document on the platen glass.
NOTE
For details on how to load documents, see page 19.
2
Press [FAX].
3
Adjust the settings for your document as necessary.
NOTE
• To select the image quality (fax resolution), see page 97.
• To select the scan contrast, see page 97.
• To select the scan contrast, see page 97.
4
Dial the recipient’s number using the numeric keys or directory dialing.
NOTE
For details on how to use directory dialing, see page 99.
5
Press [Color] for color sending, or [Black] for black & white sending.
IMPORTANT
Color sending is available only when the recipient’s fax machine supports color faxing.
6
The LCD displays the following message when the first document is
scanned. For a multipage document, load the next page and press [Color]
or [Black]. If sending only one page, go to step 7.
scanned. For a multipage document, load the next page and press [Color]
or [Black]. If sending only one page, go to step 7.
IMPORTANT
If you do not press the same key you pressed in step 5, the machine does not start scanning.
7
Press [Set] to start sending.
NOTE
• To cancel sending before sending a fax, press [Stop/Reset].
• To cancel memory sending while sending a fax, follow any instructions on the LCD after
• To cancel memory sending while sending a fax, follow any instructions on the LCD after
pressing [Stop/Reset].
NEXT PAGE :START
END SCANNING:SET
PC