Canon MP390 Guía Del Usuario
Chapter 11
Receiving Faxes
107
X Setting The Receive Mode
Follow this procedure:
X Canceling Receiving
Press [Stop/Reset] and follow any instructions on the LCD.
1
Press [Additional Functions].
2
Press [Set] twice.
3
Use [
W] or [X] to select the receive mode.
– <FAX/TEL AUTO SW>:
Set to automatically switch between fax and voice calls. Faxes
will be received automatically, and the machine will ring for
voice calls. (If you connected a telephone to your machine, the
telephone will not ring.)
will be received automatically, and the machine will ring for
voice calls. (If you connected a telephone to your machine, the
telephone will not ring.)
– <FAX ONLY MODE>:
Set to automatically receive faxes only. (If you connected a
telephone to your machine, the telephone will not ring.)
telephone to your machine, the telephone will not ring.)
– <DRPD>:
Set if you have subscribed to a Distinctive Ring Pattern
Detection (DRPD) service offered by some companies.
Detection (DRPD) service offered by some companies.
– <MANUAL MODE>:
Set for the machine to ring for fax and voice calls. Fax calls
must be answered manually.
must be answered manually.
– <ANS.MACHINE MODE>:
Set for the answering machine connected to your machine to
respond to an incoming call first, and then to receive faxes
automatically.
respond to an incoming call first, and then to receive faxes
automatically.
4
Press [Set].
The receive mode will be displayed on the bottom left of the LCD.
Ex:
RECEIVE MODE
FAX/TEL AUTO SW
Ex:
12/04/2003 THU 15:30
FaxTel STANDARD
Receive mode