Canon MP390 Guía Del Usuario
28
Document And Paper Handling
Chapter 2
Loading Envelopes
Follow this procedure:
1
Set the paper thickness lever to the right.
NOTE
For details on setting the paper thickness lever, see page 26.
2
Open the multi-purpose tray, then pull out the tray extension.
3
Prepare the envelopes for loading.
IMPORTANT
• Press down firmly on the edges of the envelopes to
make the folds crisp. Also, press firmly on the
area that corresponds to the edges of the back
flap.
area that corresponds to the edges of the back
flap.
• Remove any curling by holding the edges
diagonally and bending them gently.
• If the edges of the envelope are inflated or are
curling, place the envelope on a flat surface. With
a pen, press down while moving it from the center
toward the edges of the envelope.
a pen, press down while moving it from the center
toward the edges of the envelope.
• Ensure that no curl or puff exceeds 1/8 in.
(3 mm).
Cross-sections of the envelope edge
Incorrect
Correct