Aiwa xc-30 Guía De Operación
AI EDIT RECORDING
The AI EDIT function lets you record tracks from one disc without
worrying about tape lengths and track lengths. When you insert
a CD, the unit automatically calculates track lengths. If necessary,
it rearranges the order of tracks, so that no track is cut short.
worrying about tape lengths and track lengths. When you insert
a CD, the unit automatically calculates track lengths. If necessary,
it rearranges the order of tracks, so that no track is cut short.
Use the remote control.
1 Prepare for recording.
2 Load the disc(s) onto the disc trays.
3 Press the DISC SKIP button to select a disc.
4 Press the AI EDIT button.
“
” appears around AI and EDIT in the display.
5 Press the numbered buttons to designate the tape
length.
Enter a length from 10 to 99 minutes.
Example: when using a 60-minute tape, press the 6 and 0
buttons.
In a few seconds, the microcomputer determines the tracks
to be recorded on each side of the tape.
• The
Example: when using a 60-minute tape, press the 6 and 0
buttons.
In a few seconds, the microcomputer determines the tracks
to be recorded on each side of the tape.
• The
r
and
t
buttons are also available to designate
the tape length.
6 Select the proper function (CD or AUX) in the
stereo system.
7 Start recording.
Press the
c
/
a
button on the XC-30M to start play and the
button for recording on the connected stereo system.
After play of programmed tracks on side A finishes, the XC-
30M pauses. Reverse the cassette tape and start play and
recording again. Play of programmed tracks on side B starts.
After play of programmed tracks on side A finishes, the XC-
30M pauses. Reverse the cassette tape and start play and
recording again. Play of programmed tracks on side B starts.
RECORDING
Selected disc number
Tape side
Total number of
programmed tracks
programmed tracks
Time remaining on
the tape
the tape
Programmed
tracks
tracks
To stop recording in the middle of the program
Press the
Press the
s
button on the cassette deck.
To clear the edit program
Before recording, press the
Before recording, press the
s
button twice so that “
”
around EDIT goes out.
To check the order of the programmed tracks
Before recording, press the AI EDIT button to select side A or B,
and press the PRGM/CHECK button repeatedly. The tracks in
the program are shown from the first track.
Before recording, press the AI EDIT button to select side A or B,
and press the PRGM/CHECK button repeatedly. The tracks in
the program are shown from the first track.
To delete a programmed track
Before recording, press the AI EDIT button to select side A or B,
and press the PRGM/CHECK button repeatedly to display the
track to be deleted, and then press the DELETE button on the
main unit.
Before recording, press the AI EDIT button to select side A or B,
and press the PRGM/CHECK button repeatedly to display the
track to be deleted, and then press the DELETE button on the
main unit.
To add tracks to the edit program
If there is any time remaining on the tape after step 6, you can
add tracks from other discs in the CD compartment before
recording starts.
1 Press the AI EDIT button to select side A or B.
2 Press one of the DISC 1-5 buttons to select a disc.
3 Press the numbered buttons to select tracks.
If there is any time remaining on the tape after step 6, you can
add tracks from other discs in the CD compartment before
recording starts.
1 Press the AI EDIT button to select side A or B.
2 Press one of the DISC 1-5 buttons to select a disc.
3 Press the numbered buttons to select tracks.
If the playing time of a selected track is longer than the
remaining time, it is not added.
remaining time, it is not added.
4 Repeat steps 2 and 3 to add more tracks.
The AI edit recording cannot be used with discs containing 31
tracks or more.
tracks or more.
Track number
Program number
7
ENGLISH