CME uf5 Guía Del Usuario

11

2.6 Pitch bend wheel

By rotating the pitch bend wheel when playing the keyboard, you

can change the current note pitch.

2.6.1 Pitch bend wheel sends PITCH BEND message.

2.7 Modulation wheel

By rotating the Modulation wheel when playing the keyboard, you

can add vibration to the sound.

2.7.1 Modulation wheel sends MIDI controller 1# message.

2.8 Adjust volume and customize faders

You can use front panel faders to control volumes for each

channel (to send MIDI controller 7# message to the channel).

Before you adjust the volume, please notice the LED indicator

for FADER FUNC. button:

This button will set the 9 faders to one of the three function sets below:

1 When no LED indicator lights, the 9 faders are used to control

master volume and channel volume for channel 1 to channel 8.

2 When the upper LED indicator lights, the 9 faders are used to

control master volume and channel volume for channel 9 to channel 16.

3 When the lower LED indicator lights, the 9 faders are used as

assignable fader controllers (CS0-CS8).
Hints:

1.Make sure your tone generator meets or compatible with General MIDI

specification 1.0, otherwise those faders do not work.

2. Some music software does not fully support the sysx for master volume,

so please be careful using this function.

Assign functions to faders:

1 Push and hold  FADER FUNC. button, then move one of the

faders that you wish  assign function to, after that you can assign new
controller number to the fader.

2 After new controller number is assigned, release  FADER

FUNC. button.

Hint

For detail about assignable controllers, refer to appendix 5.1

Play the instrument