Citel 6000 Guía De Instalación

EXTender 6000 Quick Installation Guide

 

23

 

 

Procedure 
1. Access 

the 

WAN 1 or WAN 2 Menu using the following path; 

 

Remote or Gateway->Configuration->WAN 1 or 2 

 

The WAN menu appears.  

 

2. Press 

the 

Ækey to access the parameters. 

3. Press 

the 

Èkey to the Mode parameter. This parameter must match the protocol used by the network 

device connected to the WAN port. Press the 

→ key to scroll through the available protocols. 

4. Press 

the 

Å key to accept changes and go back to the Configuration Menu. 

5. Press 

the 

Èkey to the Save parameter. 

6. Press 

Enter to save changes to the active config (.rem) file.