Citel 6000 Guía Del Usuario

 

PBXgateway

™ 

& EXTender

TM

 

6000 System Administrator’s Guide

 

43

 

The PBXgateway has a terminal based user interface for access to the MI for 
configuration purposes. 
 
Console User Interface: 
VT-100 Enhanced Terminal Interface (ETI) accessed from a PC via one of 
three possible methods: 

•  Direct Serial connection through the console port located on the front of 

the PBXgateway. (refer to page 44) 

•  LAN-based Telnet access (see page 46) 
•  In-band management connection between the Switch and Remote (see 

 
It is recommended that an administrator password be assigned to prevent 
unauthorized access to the Remote and PBXgateway. The PBXgateway has 
two separate levels of password security: 
 
Connect Password: Set by the system administrator, provides a secure WAN 
link between the Gateway and Remote units. (see page 67 for more 
information). 
Your password should be alphanumeric only. In other words, only use 
numbers or letters that are on the telephone keypad. DO not use symbols such 
as $, & or *, as these cannot be entered on a digital deskset keypad. 
 
Admin Password: Set by the system administrator and provides security to 
restrict access to the MI. (See page 86 for more information). 
 
Note: Connect Passwords for Remotes and Gateway must match. 
 
 
A system administrator is defined as the sole person responsible for the 
maintenance and administration of the PBXgateway at the corporate facility.  
 

•  The type of network connectivity used at the Corporate and Branch location. (ie: Serial 

or IP).The type of network through which the PBXgateway communicates with the 
branch location.  (ie: ISDN or IP) 

•  The types of units installed at the remote location, (ie: EXTender 6000, IP EXTender 

4000). 

•  Information on which phones communicate with which PBXgateway ports.