Citel 6000 Guía Del Usuario
PBXgateway
™
& EXTender
TM
6000 System Administrator’s Guide
54
Remote Unit Menu Structure
Network Environments
Types of Networks
Introduction
Which type of
Network Device
do you have?
Which type of
Network Device
do you have?
This section of the manual provides the necessary information to configure
the PBXgateway and EXTender 6000 using the Management Interface (MI).
The units are programmed at the factory with “default” settings providing
basic parameters to accommodate most network environments.
Before beginning the configuration process, it is necessary to identify which
type of network device is connected to the PBXgateway and EXTender
6000. Once you know the type of connection the table, below, will direct you
to the appropriate checklist that should be used for configuration.
the PBXgateway and EXTender 6000 using the Management Interface (MI).
The units are programmed at the factory with “default” settings providing
basic parameters to accommodate most network environments.
Before beginning the configuration process, it is necessary to identify which
type of network device is connected to the PBXgateway and EXTender
6000. Once you know the type of connection the table, below, will direct you
to the appropriate checklist that should be used for configuration.
To configure the PBXgateway with
See page
a Synchronous-Serial device (RVP_Direct)
a Asynchronous-Serial device (RVP_Direct)
an IP device (RVP_IP)