Adaptec 7220ss Guía Del Usuario
6-2
Managing Disk Drives and Enclosures
Displaying All Disk Drives
You can display this information for all disk drives connected to
the controller:
the controller:
■
Channel number
■
SCSI target ID number
■
Size
■
Manufacturer
■
Model number
■
Drive firmware revision
If any of the disk drives are members of an array, the following
information may also display:
information may also display:
■
Utility running
—Expand, Verify, and so on.
■
Array number
—The array’s sequential position in the
controller’s array list.
■
Member number
—The disk drive’s sequential position in the
array.
Disk drives that are not members of any array are listed as
Available
Available
.
Disk drives that contain leftover metadata from a previous array
are listed as Leftover, which happens if disk drives are pulled and
reinserted. To clear leftover metadata, use the Clear Metadata
Function. See
are listed as Leftover, which happens if disk drives are pulled and
reinserted. To clear leftover metadata, use the Clear Metadata
Function. See
To display all disk drives:
1
From the System Menu, select Display Drives and press Enter.
The Display Drives window appears.
2
Press Esc to return to the System Menu.