3com S7906E Instruccion De Instalación
1-50
BackUpBW Type : - BackUpBW : -
Route Pinning : Disabled
Retry Limit : 5 Retry Interval: 2 sec
Reopt : Disabled Reopt Freq : -
Back Up Type : None
Back Up LSPID : -
Auto BW : Disabled Auto BW Freq : -
Min BW : - Max BW : -
Current Collected BW: -
Interfaces Protected: -
VPN Bind Type : NONE
VPN Bind Value : -
Car Policy : Disabled
Tunnel Group : Primary
Primary Tunnel : -
Backup Tunnel : -
Group Status : -
Oam Status : Up
Perform the display mpls te cspf tedb all command on Switch A to view information about links in
TEDB.
TEDB.
[SwitchA] display mpls te cspf tedb all
Maximum Node Supported: 128 Maximum Link Supported: 2048
Current Total Node Number: 4 Current Total Link Number: 6
Id MPLS LSR-Id IGP Process-Id Area Link-Count
1 3.3.3.9 ISIS 1 Level-2 2
2 2.2.2.9 ISIS 1 Level-2 2
3 4.4.4.9 ISIS 1 Level-2 1
4 1.1.1.9 ISIS 1 Level-2 1
7) Create a static route for routing MPLS TE tunnel traffic
[SwitchA] ip route-static 30.1.1.2 24 tunnel 1 preference 1
Perform the display ip routing-table command on Switch A. You can find a static route entry with
interface Tunnel1 as the outgoing interface.
interface Tunnel1 as the outgoing interface.
RSVP-TE GR Configuration Example
Network requirements
z
Switch A, Switch B and Switch C are running IS-IS. All of them are Level-2 devices and support
RSVP hello extension.
RSVP hello extension.
z
Use RSVP-TE to create a TE tunnel from Switch A to Switch C.
z
Switch A, Switch B and Switch C are RSVP-TE neighbors. With GR capability, each of them can
provide GR helper support when another is GR restarting.
provide GR helper support when another is GR restarting.