3com S7906E Instruccion De Instalación
1-2
Creating a User Profile
Configuration Prerequisites
Before creating a user profile, you need to configure authentication parameters. User profile supports
802.1X and portal authentications. You can select one of them to authenticate users based on the
actual networking when users access the network. However, you need to perform the related
configurations (for example, username, password, authentication scheme, domain and binding
between a user profile and user) on the client, the device and authentication server.
Creating a User Profile
Follow these steps to create a user profile:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Create a user profile, and enter
its view
its view
user-profile profile-name
Required
If the specified user profile
already exists, you will directly
enter the corresponding user
profile view.
already exists, you will directly
enter the corresponding user
profile view.
The configuration made in user
profile view takes effect when
the user profile is enabled and
a user using the user profile
goes online.
profile view takes effect when
the user profile is enabled and
a user using the user profile
goes online.
Configuring a User Profile
After a user profile is created, you need to apply a QoS policy in user profile view to implement
restrictions on the online users.
Follow these steps to apply the QoS policy to online users:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter user profile view
user-profile profile-name
Required
The configuration made in user
profile view takes effect when
the user-profile is activated
and there are online users.
profile view takes effect when
the user-profile is activated
and there are online users.
Apply the QoS policy
qos apply policy policy-name
{ inbound | outbound }
{ inbound | outbound }
Required
Use the inbound keyword to
apply the QoS policy to the
traffic received by the online
users. Use the outbound
keyword to apply the QoS
policy to the traffic sent by the
online users.
apply the QoS policy to the
traffic received by the online
users. Use the outbound
keyword to apply the QoS
policy to the traffic sent by the
online users.