3com S7906E Instruccion De Instalación
1-18
To do…
Use the command…
Remarks
Configure the size of a probe
packet to be sent
packet to be sent
data-size size
Optional
By default, the probe packet
size depends on the codec
type. The default packet size is
172 bytes for G.711A-law and
G.711 µ-law codec type, and is
32 bytes for G.729 A-law codec
type.
size depends on the codec
type. The default packet size is
172 bytes for G.711A-law and
G.711 µ-law codec type, and is
32 bytes for G.729 A-law codec
type.
Configure the filler string of a
probe packet sent
probe packet sent
data-fill string
Optional
By default, the filler string of a
probe packet is the
hexadecimal number
00010203040506070809.
probe packet is the
hexadecimal number
00010203040506070809.
Configure the number of
packets sent in a voice probe
packets sent in a voice probe
probe packet-number
packet-number
Optional
1000 by default.
Configure the interval for
sending packets in a voice
probe
sending packets in a voice
probe
probe packet-interval
packet-interval
packet-interval
Optional
20 milliseconds by default.
Configure the timeout for
waiting for a response in a
voice test
waiting for a response in a
voice test
probe packet-timeout
packet-timeout
packet-timeout
Optional
5000 milliseconds by default.
Configure common optional
parameters
parameters
Optional
Only one probe can be made in one voice test, and the number of probe packets sent in each probe
depends on the configuration of the probe packet-number command.
Configuring a DLSw Test
A DLSw test is used to test the response time of the DLSw device.
Configuration prerequisites
Enable the DLSw function on the peer device before DLSw test.
Configuring a DLSw test
Follow these steps to configure a DLSw test:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter NQA test group view
nqa entry admin-name
operation-tag
operation-tag
—
Configure the test type as
DLSw and enter test type view
DLSw and enter test type view
type dlsw
Required