3com S7906E Guía De Referencia
1-10
Examples
# Enable load splitting of IPv6 multicast traffic on a per-source basis.
<Sysname> system-view
[Sysname] multicast ipv6 load-splitting source
multicast ipv6 longest-match
Syntax
multicast ipv6 longest-match
undo multicast ipv6 longest-match
View
System view
Default Level
2: System level
Parameters
None
Description
Use the multicast ipv6 longest-match command to configure RPF route selection based on the
longest match principle, namely to select the route with the longest prefix as the RPF route.
Use the undo multicast ipv6 longest-match command to restore the default.
By default, the route with the highest priority is selected as the RPF route.
Examples
# Configure RPF route selection based on the longest match.
<Sysname> system-view
[Sysname] multicast ipv6 longest-match
multicast ipv6 routing-enable
Syntax
multicast ipv6 routing-enable
undo multicast ipv6 routing-enable
View
System view
Default Level
2: System level
Parameters
None