3com S7906E Guía De Referencia
2-19
Examples
# Specify the secondary accounting server for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] secondary accounting 10.110.1.1 1813
secondary authentication (RADIUS scheme view)
Syntax
secondary authentication ip-address [ port-number ]
undo secondary authentication
View
RADIUS scheme view
Default Level
2: System level
Parameters
ip-address: IP address of the secondary authentication/authorization server, in dotted decimal notation.
The default is 0.0.0.0.
port-number: UDP port number of the secondary authentication/authorization server, which ranges from
1 to 65535 and defaults to 1812.
Description
Use the secondary authentication command to specify the secondary RADIUS
authentication/authorization server.
Use the undo secondary authentication command to remove the configuration.
By default, no secondary RADIUS authentication/authorization server is specified.
Note that:
z
The IP addresses of the primary and secondary authentication/authorization servers cannot be the
same. Otherwise, the configuration fails.
z
The RADIUS service port configured on the device and that of the RADIUS server must be
consistent.
Related commands: key, radius scheme, state.
Examples
# Specify the secondary authentication/authorization server for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] secondary authentication 10.110.1.2 1812