3com S7906E Guía De Referencia
1-2
Field
Description
Current patch number
Total number of the current patches
Running patch number
Number of running patches
Active patch number
Number of active patches
patch active
Syntax
patch active patch-number [ slave | slot slot-number ]
View
System view
Default Level
3: Manage level
Parameters
patch-number: Sequence number of a patch. The valid values of this argument depend on the patch file
used.
slave: Specifies the standby main board.
slot slot-number: Specifies a board by its slot number. The value range of this argument varies with the
device model.
Description
Use the patch active command to activate the specified patch, namely, the system will run the patch.
After you execute the command, all the DEACTIVE patches before the specified patch number are
activated.
Note that:
z
The command is not applicable to patches in the DEACTIVE state.
z
After a system reboot, the original ACTIVE patches change to DEACTIVE and become invalid. To
make them effective, you need to activate them again.
If you execute this command without specifying slave or slot-number, the command activates the
specified patches on the active main board.
Examples
# Activate patch 3 and all the DEACTIVE patches before patch 3 on the standby main board.
<Sysname> system-view
[Sysname] patch active 3 slave
patch deactive
Syntax
patch deactive patch-number [ slave | slot slot-number ]