3com S7906E Guía De Referencia
1-15
[Sysname] rrpp domain 1
[Sysname-rrpp-domain1] control-vlan 100
[Sysname-rrpp-domain1] protect-vlan reference-instance 0 1 2
[Sysname-rrpp-domain1] ring 10 node-mode master primary-port gigabitethernet 3/0/1
secondary-port gigabitethernet 3/0/2 level 0
[Sysname-rrpp-domain1] ring 10 enable
rrpp domain
Syntax
rrpp domain domain-id
undo rrpp domain domain-id
View
System view
Default Level
2: System level
Parameters
domain-id: RRPP domain ID, in the range 1 to 8.
Description
Use the rrpp domain command to create an RRPP domain and enter its view.
Use the undo rrpp domain command to remove an RRPP domain.
Note that:
z
When you delete an RRPP domain, the control VLAN of it will be deleted at the same time.
z
When you delete an RRPP domain, you must ensure it has no RRPP ring.
Related commands: control-vlan, ring, ring enable, rrpp enable, timer.
Examples
# Create RRPP domain 1.
<Sysname> system-view
[Sysname] rrpp domain 1
[Sysname-rrpp-domain1]
rrpp enable
Syntax
rrpp enable
undo rrpp enable
View
System view