3com S7906E Guía De Referencia
3-3
Field
Description
T1 will timeout in 1 day 11 hours
58 minutes 52 seconds.
58 minutes 52 seconds.
How long the T1 (1/2 lease time) timer will timeout.
ip address dhcp-alloc
Syntax
ip address dhcp-alloc [ client-identifier mac interface-type interface-number ]
undo ip address dhcp-alloc
View
Interface view
Default Level
2: System level
Parameters
client-identifier mac interface-type interface-number: Specifies the MAC address of an interface using
which as the client ID to obtain an IP address.
Description
Use the ip address dhcp-alloc command to configure an interface to use DHCP for IP address
acquisition.
Use the undo ip address dhcp-alloc command to cancel an interface from using DHCP.
By default, an interface does not use DHCP for IP address acquisition.
Note that:
z
If no parameter is specified, the client uses a character string comprised of the current interface
name and MAC address as its ID for address acquisition.
z
The DHCP client sends a DHCP-RELEASE message for releasing the IP address obtained via
DHCP, if the interface of the client is down, the message cannot be sent.
z
For a sub interface that obtained an IP address via DHCP, using the shutdown command on its
primary interface does not make the DHCP client send a DHCP-RELEASE message for releasing
the sub interface’s IP address.
Examples
# Configure VLAN-interface 1 to use DHCP for IP address acquisition.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] ip address dhcp-alloc