Gestetner 3532 Guía De La Red
Confirming the Connection
11
2
Using the IEEE 802.11b
(Wireless LAN)
(Wireless LAN)
AAAA
Make sure the LED of the IEEE
802.11b card is lit.
802.11b card is lit.
❖
❖
❖
❖ When using in Infrastructure Mode
1.
If the IEEE 802.11b card is work-
ing, it is lit in orange. If the IEEE
802.11b (wireless LAN) is not select-
ed, it does not light, even if the ma-
chine power is on.
802.11b (wireless LAN) is not select-
ed, it does not light, even if the ma-
chine power is on.
2.
If it is connected properly to a net-
work, the LED is green in infrastruc-
t u r e m o d e . W h e n t h e L E D i s
blinking, the machine is searching
for devices.
t u r e m o d e . W h e n t h e L E D i s
blinking, the machine is searching
for devices.
❖
❖
❖
❖ When using in Ad hoc Mode/802.11
Ad hoc Mode
1.
If the IEEE 802.11b card is work-
ing, it is lit in orange.
2.
If it is connected properly to a net-
work, the LED is green in ad hoc
mode or 802.11 ad hoc mode. When
the LED is blinking, the machine is
searching for devices. The LED will
light after a few seconds.
mode or 802.11 ad hoc mode. When
the LED is blinking, the machine is
searching for devices. The LED will
light after a few seconds.
BBBB
Print the configuration page to
verify settings.
verify settings.
Reference
For more information about
printing a configuration page,
see Printer Reference 2.
For more information about
printing a configuration page,
see Printer Reference 2.
Checking the Machine's Radio Wave
Status
Status
You can check the machine's radio
wave status using the machine's con-
trol panel.
wave status using the machine's con-
trol panel.
Infrastructure Mode
AAAA
Press the
{{{{User Tools/Counter}}}} key.
BBBB
Press [System Settings].
CCCC
Press [Interface Settings].
DDDD
Press [Network].
ZGDH600J
1
2
2
ZGDH600J
1
2
2