Gestetner 3532 Guía De La Red

Setting Up the Machine on a Network

22

❖

❖

❖

❖ DNS Configuration

Make settings for the DNS server.

❒ Default: Auto-Obtain (DHCP)
❒ When you select [Specify], enter

t h e   D N S   s e r v e r   v a l u e   a s
“xxx.xxx.xxx.xxx”(“x” indi-
cates a number).

❖

❖

❖

❖ Effective Protocol

Select the protocol to use in the
network.

❒ Default:  TCP/IP:Effective, Net-

❖

❖

❖

❖ NW Frame Type

Select the frame type when you
use NetWare.

❒ Default: Auto select

❖

❖

❖

❖ LAN Type

When you have installed the wire-
less LAN board (optional), select
interface, Wireless LAN (IEEE
802.11b) or Ethernet.

❒ Default: Ethernet

❖

❖

❖

❖ Ethernet Speed

Set the access speed for networks.
Select a speed that matches your
network environment. “Auto Se-
lect” should usually be specified.

❒ Default: Auto select

❖

❖

❖

❖ Host Name 

Specify the host name.

❖

❖

❖

❖ Domain Name

Specify the domain name.

Preparation
You must install the IEEE 1394 in-
terface board (optional) into the
machine.

❖

❖

❖

❖ IP Address

When you connect the machine to
a network using the IEEE 1394 in-
terface board (optional), you must
configure the IP address.

❒ Default: Auto-Obtain (DHCP)
❒ When you select [Specify], enter

the IP address and subnet mask
as “xxx.xxx.xxx.xxx”(“x” indi-
cates a number).

❒ To configure the IP address, you

need to enable “IP over 1394”.

❒ If you use the interface for Eth-

ernet and IEEE 1394 (IP over
1394) at the same time, settings
must be made with care.

❒ When you use the IEEE 1394 in-

terface on a network, you can-
not use the Ethernet interface in
the same domain. To use both
interfaces in the same domain,
set different values for the Sub-
net Mask.

❖

❖

❖

❖ IP over 1394

When you use the IP over 1394
function of the IEEE 1394 interface
to connect the machine to the net-
work, or you print using a person-
al computer with the IP over 1394
driver, you must set IP over 1394.

❒ Default: Active