Gestetner 3532 Guía De La Red

Using the Printer Function

40

This chapter describes how to config-
ure the machine for use as a print
server or a remote printer in a Net-
Ware environment.

This section assumes NetWare is
functional and the necessary environ-
ment for the NetWare Print Service is
available.

❒ NetWare must be set to active us-

ing the machine's control panel.
For more information about how
to set it, see General Settings Guide.

❖

❖

❖

❖ SmartNetMonitor for Admin

Using a printer in a NetWare envi-
ronment, configure the NetWare
printing environment by using
SmartNetMonitor for Admin.

❒ If you configure NetWare print-

ing using SmartNetMonitor for
Admin under the following en-
vironments, NetWare Client
provided by Novell is required:
• NDS mode in Windows 95

/98/Me

• NDS or Bindery mode in

Windows 2000/Windows
NT 4.0

❖

❖

❖

❖ Printers listed by SmartNetMonitor for

SmartNetMonitor for Admin dis-
plays a list of printers, which are
connected to the network.
If you cannot find out the printer
from the displayed list, refer to the
configuration page printed from
the printer. For more information
about printing a configuration
page, see General Settings Guide.

Install the NIB Setup Tool

Print Server

Remote Printer

Configure the Network Interface Board

Configure the NetWare

Start the print server

Restart the printer