Gestetner 3532 Guía De La Red
Appendix
90
9
Machine Status and Configuration
You can check the machine status and configuration using telnet or UNIX.
❖
❖
❖
❖ telnet
Use the info or status command.
❖
❖
❖
❖ UNIX
Use the lpr or lpstat command, or stat or info parameter of rsh, rcp, or ftp.
machine status
Status
Description
Ready Normal
operation
Panel Off Mode
Panel Off mode
Energy Saver Mode
Energy Saver mode
Warming Up
Warming up
Error: Parallel I/F
Parallel interface board error
Error: NVRAM
Contents of the memory unit are damaged.
Error: DIMM
DIMM has a problem.
Error: HDD
Hard disk drive has a problem.
Error: Ethernet
Ethernet board has a problem.
Error: IEEE1394
IEEE 1394 board has a problem.
Error: Wireless Card
Wireless card is not inserted when the ma-
chine is turned on or has been removed.
chine is turned on or has been removed.
Error: Wireless Card or Board
Wireless card or board has a problem.
Error: USB I/F
USB interface board has a problem.
Low: Toner
Toner is almost empty.
Nearly Full: Waste Toner
Waste toner is soon full.
In Use: Staple Unit
Staple unit is in use.
In Use: Input Tray
Paper tray is in use.
Malfunction: Tray X
Paper cannot be fed from tray X. An error has
occurred in tray X. (X is the number of the
tray.)
occurred in tray X. (X is the number of the
tray.)
Malfunction: LargeCapacity Tray
Paper cannot be fed from the Large Capacity
Tray. An error occurred in the Large Capacity
Tray.
Tray. An error occurred in the Large Capacity
Tray.
Malfunction: ExternalCharge Unit
External charge unit is faulty.
Malfunction: Staple Unit
Cannot staple. Staple unit is faulty.