Gestetner 3532 Guía Del Usuario
If You Cannot Make Copies As You Want
81
3
❖
❖
❖
❖ Edit
❖
❖
❖
❖ Stamp
❖
❖
❖
❖ Combine
Problem
Causes
Solutions
In Double Copies mode,
parts of the original image
are not copied.
parts of the original image
are not copied.
Combination of original
and copy paper is not cor-
rect.
and copy paper is not cor-
rect.
Select A3
L for A4 K originals and
A4 for A5 originals.
In Border, Centre, or Cen-
tre/Border mode, parts of
the original image are not
copied.
tre/Border mode, parts of
the original image are not
copied.
You set a wide erased mar-
gin.
gin.
Make the margin width narrower.
You can adjust it between 2–99 mm
(0.1"–3.9"). See p.96 “Erase Border
Width”and p.96 “Erase Centre
Width”.
You can adjust it between 2–99 mm
(0.1"–3.9"). See p.96 “Erase Border
Width”and p.96 “Erase Centre
Width”.
Originals are not scanned
correctly.
correctly.
Place the originals correctly.
In Margin Adjustment
mode, parts of the original
image are not copied.
mode, parts of the original
image are not copied.
You set a wide erased mar-
gin.
gin.
Set a narrower margin with User
Tools. You can set the width be-
tween 0–30 mm (0"–1.2"). See p.95
“Front Margin: Left/Right”, p.95
“Front Margin: Top/Bottom”, p.95
“Back Margin: Left/Right”, and
p.95 “Back Margin: Top/Bottom”.
Tools. You can set the width be-
tween 0–30 mm (0"–1.2"). See p.95
“Front Margin: Left/Right”, p.95
“Front Margin: Top/Bottom”, p.95
“Back Margin: Left/Right”, and
p.95 “Back Margin: Top/Bottom”.
There is a lack of margin
space on the opposite side
of the binding position.
space on the opposite side
of the binding position.
In Image Repeat mode, the
original image is not cop-
ied repeatedly.
original image is not cop-
ied repeatedly.
You selected copy paper the
same size as the originals,
or you did not select the
proper reproduction ratio.
same size as the originals,
or you did not select the
proper reproduction ratio.
Select copy paper larger than the
originals.
originals.
Select the proper reproduction ratio.
Problem
Causes
Solutions
The stamp position is
wrong.
wrong.
The paper orientation is
wrong.
wrong.
Check the paper orientation and
stamp position.
stamp position.
Problem
Causes
Solutions
You cannot make a book
from Booklet or Magazine
mode by folding copies.
from Booklet or Magazine
mode by folding copies.
You selected a setting
(“Open to left”or “Open to
right”) that does not match
the orientation of originals.
(“Open to left”or “Open to
right”) that does not match
the orientation of originals.
Change the setting.
When using Combine,
parts of the image are not
copied.
parts of the image are not
copied.
You specified a reproduc-
tion ratio that does not
match the sizes of your
originals and copy paper.
tion ratio that does not
match the sizes of your
originals and copy paper.
When you specify a reproduction ra-
tio using Manual Paper Select mode,
make sure that the ratio matches
your originals and the copy paper.
tio using Manual Paper Select mode,
make sure that the ratio matches
your originals and the copy paper.
Note
❒ Select the correct reproduction
ratio before using Combine
mode.
mode.
AdonisC3_GBcopyF_FM1.book Page 81 Thursday, November 28, 2002 1:53 PM