Gestetner 3532 Guía De Operación

Installing the Software

Setting Up the PPD File

AAAA

Run Print Center.

BBBB

Click [Add Printer].

Note

❒ Select [AppleTalk] in the first

pop-up menu.

❒ If the zone has been set, select

the zone in the second pop-up
menu.

CCCC

Select the PPD file for the model
you are using from the [Printer
Model:]

pop-up menu.

DDDD

Click [Add].

Setting Up Options

Limitation

❒ You can make all the settings of

printer features, even if the neces-
sary option is not installed, due to
the limitation of Mac OS X native
mode. Confirm which option is in-
stalled to the machine before you
print.

Installing the Printer Driver
Using USB

This section gives basic instructions
for installing printer drivers using
USB. The printer drivers can be in-
stalled from the CD-ROM that comes
with this machine.

Preparation
Make sure that all other applica-
tions are closed and the computer
is not printing before installation.

Windows 98 SE/Me - Installing the Printer
Driver Using USB

The procedure below uses Windows
98 as an example. The procedure for
Windows Me may be slightly differ-
ent.
When the USB interface cable is used
for the first time, the “plug and play”
function starts and [New Hardware
Found]

, [Device Driver Wizard] or [Found

New Hardware Wizard]

dialog box ap-

pears, depending on the system used.
If printer drivers are already in-
stalled, the “plug and play” is dis-
played, and the printer with its port
directed to the USB interface cable is
added to the Printers folder.

AAAA

Click [Next].

BBBB

Select [Search for the best driver for
your device. {Recommended}.]

, and

then click [Next].

CCCC

Check [Specify a location:], and then
click [Browse...].
The [Browse for Folder] dialog box
appears.

DDDD

Insert the CD-ROM provided
into the CD-ROM drive.