Lexmark Optra T Instruccion De Instalación
Install Memory and Optional Cards
17
Installing an Optional Card
A number of cards are available for your printer.
Refer to the documentation that is included with
each card for detailed information about that spe-
cific card.
each card for detailed information about that spe-
cific card.
Your printer will accommodate one or two cards,
depending on the model. The installation instruc-
tions are the same for each type of card.
depending on the model. The installation instruc-
tions are the same for each type of card.
Warning!
Electronic components are easily damaged by static
electricity. Touch something metal on the printer before you
touch the card.
electricity. Touch something metal on the printer before you
touch the card.
1
Before you install the card, follow the steps
under “Accessing the Printer System Board”
beginning on page 15.
under “Accessing the Printer System Board”
beginning on page 15.
2
Locate the card connectors on the system
board. If you are installing only one card,
install it in connector 1. If you are installing
two cards on a model with multiple
connectors, use connector 1 first and then
connector 2.
board. If you are installing only one card,
install it in connector 1. If you are installing
two cards on a model with multiple
connectors, use connector 1 first and then
connector 2.
3
Locate the two screws on the back of the
printer that attach the metal plate to the slot.
printer that attach the metal plate to the slot.
4
Remove and save the two screws. Remove
and discard the plate.
and discard the plate.
5
Unpack the card. Save the packaging
materials.
materials.
MarkNet internal
print server
print server
Tri-Port
interface
interface
Hard disk
with adapter
with adapter
Parallel/USB
interface
interface
Connector 1
Connector 2
Connector 2