Lexmark Optra T Guía Del Usuario
132
Solving Printer Problems
Display problems
If the suggested corrective action does not fix the problem, call your service
representative.
representative.
Problem
Action
Menus Disabled
status
message displays on the
operator panel.
operator panel.
The operator panel menus are disabled. To enable the menus:
• Turn the printer off.
• Press and hold
• Press and hold
Select
and
Return
and then turn on the printer.
• Release the buttons when
Performing Self Test
displays.
•
CONFIG
MENU
displays on the first line of the operator panel.
• Press
Menu>
until
Panel
Menus
displays.
• Press
Select
.
•
Enable
displays on the second line of the operator panel.
• Press
Select
.
•
Enabling
Menus
briefly displays.
• Press
Menu>
until
Exit
Config
Menus
displays.
• Press
Select
.
If the operator panel menus are password protected, see
Operator panel displays only
diamonds or is blank.
diamonds or is blank.
• Turn the printer off, wait about 10 seconds, and turn the printer on.
•
•
Performing Self Test
displays on the operator panel. When the test is completed,
Ready
displays.
If the messages do not display, turn the printer off and call the Lexmark Customer Support Center.
Menu settings changed from
the operator panel have no
effect.
the operator panel have no
effect.
Settings in the software application, the printer driver, or the printer utilities are overriding the settings in the
operator panel.
operator panel.
• Change the menu settings from the printer driver, the printer utilities, or the software application instead of the
operator panel.
• Disable the settings in the printer driver, the printer utilities, or the software application so you can change
settings from the operator panel.