Lexmark Optra T Guía Del Usuario
135
Solving Printer Problems
Print quality problems
If the suggested corrective action does not fix the problem, call your service
representative.
representative.
Problem
Action
Print is too light.
• The toner may be low. Remove the cartridge. To utilize the remaining toner, shake the cartridge gently.
Reinstall the same print cartridge.
• Change the
Toner Darkness
setting in the
QUALITY MENU
. See
• If you are printing on an uneven print surface, change the
PAPER WEIGHT
and
PAPER TEXTURE
settings in
the
PAPER MENU
. See
.
• Verify that the correct print material is being used.
Toner smears or print comes
off the page.
off the page.
• If you are printing on an uneven print surface, change the
PAPER WEIGHT
and
PAPER TEXTURE
settings in
the
PAPER MENU
. See
.
• Verify that the print material is within the printer specifications. Refer to the
• If the problem continues, call the Lexmark Customer Support Center.
Toner appears on the back of
the printed page.
the printed page.
Toner is on the transfer roll. To help prevent this, do not load print material that is smaller than the page size of
the job to be printed.
the job to be printed.
• Open and close the printer upper front door to run the printer setup cycle and clean the transfer roll.