Boss Audio bv9650 Guía Del Usuario
08
37
Before You Start
IMPORTANT SAFEGUARDS
About this manual
Be sure to connect the color coded leads
according to the diagram. Incorrect con-
nections may cause the unit to malfunct-
according to the diagram. Incorrect con-
nections may cause the unit to malfunct-
,
ion or damage the vehicle s electrical sy-
stem.
stem.
Be sure to connect the speaker (-) leads
to the speaker (-) terminal. Never conn-
ect the left and right channel speaker c-
ables each other or to the vehicle body.
to the speaker (-) terminal. Never conn-
ect the left and right channel speaker c-
ables each other or to the vehicle body.
Make sure all the connections are comp-
letely correct before turning on your unit.
letely correct before turning on your unit.
When replacing the fuse(s), the replace-
ment must be of the same amperage as
shown on the fuse holder.
ment must be of the same amperage as
shown on the fuse holder.
Do not block vents or radiator panels. B-
locking them will cause heat to build up
inside and may result in fire.
locking them will cause heat to build up
inside and may result in fire.
This unit features a number of sophisti-
cated functions ensuring superior
operation. All the functions have been
designed for the easiest possible use,
but many are not self-explanatory. This
manual will help you understand the
functions and operations of the unit.
This manual main explains remote
control operation. However, in
addition to those functions related with
DVD/VCD/CD/MP3 operation that can
only be operated by the remote control,
there are also functions can be operated
by the buttons provided for the main
unit.
cated functions ensuring superior
operation. All the functions have been
designed for the easiest possible use,
but many are not self-explanatory. This
manual will help you understand the
functions and operations of the unit.
This manual main explains remote
control operation. However, in
addition to those functions related with
DVD/VCD/CD/MP3 operation that can
only be operated by the remote control,
there are also functions can be operated
by the buttons provided for the main
unit.
To
nstall the unit in an apt pl-
ace.
lest the driver distrack his attention
from, please i
Using the unit after starting the engine,
otherwise
otherwise
the electric energy of battery was
used up.
the unit can not be started, be-
cause
The unit must be screened from direct
sunlight, or the
sunlight, or the
will be wasting for the high temperature.
electric energy of battery
Do not use the unit in extreme high tem-
perature or such low temperature condi-
tions, and also avoid humidity and direct
sunlight.
perature or such low temperature condi-
tions, and also avoid humidity and direct
sunlight.
Take care of the magnetism of the unit.
Do no put the credit card, cassette or w-
atch around the unit, or they would be
broken or some information in them lose.
Do no put the credit card, cassette or w-
atch around the unit, or they would be
broken or some information in them lose.
To lest disturb the video frequency, keep
far away from the unit when using your
phone.
far away from the unit when using your
phone.
Do not put the remote
under high
temperature or where the sun strikes it,
or else the control remote can not work
normally.
or else the control remote can not work
normally.
control
12
1
2
3
4
5
6
7
8
9
10
11
Tuner
Briefly press
on remote control or
press and hold MENU on the head unit,
main menu and sub-menu will appear on TFT,
pressing [ ][ ][ ][ ] on remote control
or
main menu and sub-menu will appear on TFT,
pressing [ ][ ][ ][ ] on remote control
or
SETUP
[ ][ ][ ][ ] on head unit to select
your desired items, then press ENTER on
remote control or on head unit to confirm.
Press EXIT to back out.
remote control or on head unit to confirm.
Press EXIT to back out.
Set Up Radio Menu
Please refer to the following pages for more
details.
Note:
*
During radio status, briefly press SETUP on
remote control or MENU on the base, TFT
will display the following picture:
remote control or MENU on the base, TFT
will display the following picture:
To set the above items in this menu by pre-
ssing , and , and then press ENTER.
ssing , and , and then press ENTER.
Select RADIO SETTING, press ENTER,
the sub-menu will appear as follow:
the sub-menu will appear as follow:
1.RADIO SETTING
To set the above items in this menu by pre-
ssing , and , and then press ENTER.
ssing , and , and then press ENTER.
LOCAL ON/OFF
To set your desired LOCAL ON or OFF by
pressing , and , and ENTER. The
default setting is OFF as the distance stations
can be received. If the setting is ON, only the
local stations can be received.
pressing , and , and ENTER. The
default setting is OFF as the distance stations
can be received. If the setting is ON, only the
local stations can be received.