GoVideo d2730 Manual Del Producto

(Default) Outputs the CD digital audio from the optical/coaxial 

digital audio outputs in its original format.

Outputs 2-channel digital audio from the optical/coaxial digital 

audio outputs.

Disables CD audio output.

Sets the outgoing digital audio format of LPCM tracks:
• Select More and press ENTER.
• Select LPCM, and then use the  /  keys to select:

(Default) Outputs the LPCM digital audio from the optical/coaxial 

digital audio outputs in its original format.

Outputs 2-channel digital audio from the optical/coaxial digital 

audio outputs.

Disables LPCM audio output.

Sets the outgoing digital audio format of VCD tracks:
• Select More and press ENTER.
• Select VCD, and then use the  /  keys to select:

(Default) Outputs the raw VCD digital audio from the optical/

coaxial digital audio outputs.

Outputs 2-channel digital audio from the optical/coaxial digital 

audio outputs.

Disables VCD audio output.

Adjusts the sound balance of your speakers. Use only if you con-

nected the D2730 to a 5.1-channel amplifier:
• Select More and press ENTER.
• Select Speaker Test and press ENTER.

• A “pink noise” test tone is automatically sent to each of the six 

speakers in a continuous loop.

• The test tone is broadcast for approximately 5 seconds in each 

speaker in the following order: Left, Right, Left Surround, Right 

Surround, Center, Subwoofer.

• Adjust the speaker levels as required by your amplifier.
• When finished, press STOP   to cancel the test tone.

4 Select OK and press ENTER.
5 Press SETUP or RETURN   to exit the Setup menu.