Gateway 200ARC Guía Del Usuario
253
Troubleshooting
www.gateway.com
To check IRQ usage in Windows 2000:
1
Click
Start
,
Settings
, then click
Control Panel
. The Control Panel
window opens.
2
Double-click the
System
icon, click the
Hardware
tab, then click
Device Manager
. The Device Manager window opens.
3
Click
View
, then click
Resources by type
. Double-click
Interrupt request
(IRQ)
. All IRQs and their hardware assignments are displayed.
To free IRQ resources for the new device:
1
In the Device Manager window, check the device list for a resource
conflict. A resource conflict appears as a black exclamation point in
a yellow circle.
conflict. A resource conflict appears as a black exclamation point in
a yellow circle.
2
Remove the device you are trying to install, then determine which
one of the existing devices or ports you can disable.
one of the existing devices or ports you can disable.
3
Right-click the device or port you want to disable, then click
Disable
.
The device or port is disabled.
Diskette drive
The diskette drive is not recognized
■
Shut down and restart your notebook.
■
The USB cable may not be inserted completely into the USB port. Press
the cable into the port, then try to access the diskette again.
the cable into the port, then try to access the diskette again.
You see an “Access Denied” or “Write protect” error message
■
Move the write-protection tab in the upper-right corner of the diskette
down (unprotected).
down (unprotected).
■
The diskette may be full. Delete unnecessary files on the diskette and try
again.
again.
■
Not all diskettes are IBM-compatible. Make sure that the diskette you are
using is IBM-compatible.
using is IBM-compatible.