Sony KDF-55XS955 Guía Del Usuario
Other Information
121
Othe
r I
n
n
fo
rm
a
tion
KDF-55/60XS955
2-059-372-11(1)
General
Problem
Possible Remedies
How to reset TV to factory
settings
settings
❏
Turn on the TV. While holding down the
RESET
button on the remote control,
press the
POWER
button on the TV. (The TV will turn itself off, then back on
again.) Release the
RESET
button.
How to restore Video settings
to factory settings
to factory settings
❏
Press
RESET
on the remote control while in the Video menu (see page 94).
How to restore Audio settings
to factory settings
to factory settings
❏
Press
RESET
on the remote control while in the Audio menu (see page 98).
Cannot cycle through the other
video equipment connected to
the LCD projection TV
video equipment connected to
the LCD projection TV
❏
Be sure the
Label Video Inputs
option is not set to
Skip
(see page 109).
Cannot operate Menu
❏
If a menu option appears in gray, this indicates that the menu option is not
available.
available.
Lost password
❏
In the password screen (see page 104), enter the following master password:
4357
. The master password clears your previous password; it cannot be used to
temporarily unblock channels.
TIMER/STANDBY LED on
front panel is lit
front panel is lit
❏
The LED (see page 22 or 122) blinks when the TV is turned on, then shuts off
when the picture is displayed. If the LED blinks continuously, this may indicate
the TV needs service. When lit, indicates that the timer is set (see page 22 or 122).
When the timer is set, this LED will remain lit even when the TV is turned off.
when the picture is displayed. If the LED blinks continuously, this may indicate
the TV needs service. When lit, indicates that the timer is set (see page 22 or 122).
When the timer is set, this LED will remain lit even when the TV is turned off.
Digital cable box does not work
❏
If you are connecting a VCR and digital cable box using a splitter, as described on
page 36, you must use a special bi-directional splitter that is designed to work
with your digital cable box. Contact your cable provider for details.
page 36, you must use a special bi-directional splitter that is designed to work
with your digital cable box. Contact your cable provider for details.
Cannot record digital channels
to VCR
to VCR
❏
Only analog channels can be recorded to your VCR.
The replacement lamp does not
light up
light up
❏
The screw of the lamp cover may be slanted. Take out the screw, insert it straight
into the screw hole, and then tighten it completely (see page 16).
into the screw hole, and then tighten it completely (see page 16).
TV cabinet creaks
❏
When the TV is in use, there is a natural rise in temperature, causing the cabinet to
expand or contract and may be accompanied by a slight creaking noise. This is not
a malfunction.
expand or contract and may be accompanied by a slight creaking noise. This is not
a malfunction.