Extreme networks LX4 XENPAK 10114 Hoja De Datos
Los códigos de productos
10114
Extreme Networks Data Sheet
The IEEE 802.3ae committee ratified the 10
Gigabit Ethernet standard and along with the
general specification, defined a number of fiber
optic interfaces. These standard interfaces
attempted to satisfy a number of different
objectives including support for MMF and SMF
compatibility.
Gigabit Ethernet standard and along with the
general specification, defined a number of fiber
optic interfaces. These standard interfaces
attempted to satisfy a number of different
objectives including support for MMF and SMF
compatibility.
XENPAK (www.xenpak.org) is the most mature
and widely deployed of the various 10 Gigabit
Ethernet MSAs. It is the only MSA that can
support all Gigabit Ethernet standard interfaces
and hence is the MSA of choice for Ethernet
switch vendors.
and widely deployed of the various 10 Gigabit
Ethernet MSAs. It is the only MSA that can
support all Gigabit Ethernet standard interfaces
and hence is the MSA of choice for Ethernet
switch vendors.
The XENPAK pluggable interface is an industry standard or
Multisource Agreement (MSA) for pluggable
10 Gigabit Ethernet Optics.
Features
LR XENPAK
10GBASE-LR transceivers support a link length of up to
10 kilometers on standard 1310 nm single-mode fiber (SMF)
10 kilometers on standard 1310 nm single-mode fiber (SMF)
ER XENPAK
ER XENPAK module supports distances of up to 40 km on
1550 nm SMF
1550 nm SMF
SR XENPAK
SR XENPAK module supports distances of up to 300 m
on 850 nm multimode fiber (MMF)
on 850 nm multimode fiber (MMF)
ZR XENPAK
ZR XENPAK provides convenient long haul 10 Gigabit
Ethernet connectivity for distances up to 80 km on
1550 nm SMF
Ethernet connectivity for distances up to 80 km on
1550 nm SMF
LX4 XENPAK
LX4 XENPAK is a single-mode, 1310 nm, 10 Gigabit Ethernet
WWDM XENPAK transceiver provides convenient 10 Gigabit
Ethernet connectivity for distances up to 300 m on MMF and
up to 10 km on SMF
WWDM XENPAK transceiver provides convenient 10 Gigabit
Ethernet connectivity for distances up to 300 m on MMF and
up to 10 km on SMF
•
•
•
•
•
XENPAK
Target Applications
LR XENPAK
Most commonly deployed in inter-building
single mode connections.
single mode connections.
ER XENPAK
10GBASE-ER transceivers are used by Ethernet
service providers for inter-PoP connectivity.
service providers for inter-PoP connectivity.
SR XENPAK
10GBASE-SR transceivers are used in a data
center to interconnect two Ethernet switches or
to link an end-device (e.g. 10 Gigabit Ethernet
servers or NAS device) to an Ethernet switch.
center to interconnect two Ethernet switches or
to link an end-device (e.g. 10 Gigabit Ethernet
servers or NAS device) to an Ethernet switch.
ZR XENPAK
For long-reach service provider interconnect and
metro Ethernet rings.
metro Ethernet rings.
LX4 XENPAK
Provides network administrators the flexibility to
use the same XENPAK for intra-building
multimode (including FDDI grade MMF) and
inter-building single-mode connections.
use the same XENPAK for intra-building
multimode (including FDDI grade MMF) and
inter-building single-mode connections.
•
•
•
•
•