KitchenAid 30-Inch 4 Element Induction Cooktop, Architect® Series II Guía De Instalación

3. Apply the adhesive provided in the kit to the back side of the 

brackets.

4. Position brackets in the center of the vertical centerline and 

align the upper edge of the brackets so that they are flush 
with the countertop. 

5. Push the brackets firmly onto each side of the cooktop cutout 

and wait 1 hour for adhesive to dry.

1. Measure the center line of the vertical sides of the cooktop 

cutout.

2. Position brackets in the center of the vertical centerline and 

align the upper edge of the brackets so that they are flush 
with the countertop.

3. Attach the brackets in the cutout with the screws provided.

1. Using 2 or more people, place the cooktop upside down on a 

covered surface using the foam end posts from the 
packaging.

2. Remove the foam roll from the package containing literature. 

Apply foam adhesive-side down around the bottom of the 
cooktop glass.

NOTE: The foam helps avoid damage to the underside of the 
cooktop glass from debris and helps the cooktop sit flat on 
uneven counters.

3. Lower the cooktop into the cutout with the front end of the 

cooktop angled down.

Center line