Canon imageRUNNER ADVANCE C5235A Manual
105
Routine Maint
enanc
e
Routine Cleaning
If the original is not copied clearly or streaks appear on printed output, clean the following parts of the machine. For high-
quality printouts, we recommend cleaning these parts once or twice a month.
quality printouts, we recommend cleaning these parts once or twice a month.
●
Platen glass
●
Underside of the feeder/platen cover
●
Feeder’s rollers
●
Inside of the main unit
●
Dust proof glass
• When cleaning the machine, fi rst turn OFF the main power switch, and disconnect the power cord.
Failure to observe these steps may result in a fi re or electrical shock.
• Disconnect the power cord from the power outlet regularly, and clean the area around the base of
the power plug’s metal pins and the power outlet with a dry cloth to ensure that all dust and grime is
removed. If the power cord is connected for a long period of time in a damp, dusty, or smoky location,
dust can build up around the power plug and become damp. This may cause a short circuit and result in
a fi re.
removed. If the power cord is connected for a long period of time in a damp, dusty, or smoky location,
dust can build up around the power plug and become damp. This may cause a short circuit and result in
a fi re.
• When cleaning with a cloth, do not dampen it too much, as this may damage the original or break the machine.
• Do not use alcohol, benzene, paint thinner, or other solvents for cleaning. Doing so may result in damage to the plastic parts.
• Do not use alcohol, benzene, paint thinner, or other solvents for cleaning. Doing so may result in damage to the plastic parts.
Platen Glass and Underside of the Feeder/Platen Cover
If the platen glass or the underside of the feeder/platen cover is dirty, the original may not be scanned clearly, or the size of
the original may be detected incorrectly. Clean the platen glass and the underside of the feeder/platen cover by following the
procedure below.
the original may be detected incorrectly. Clean the platen glass and the underside of the feeder/platen cover by following the
procedure below.
1
Clean the platen glass and the underside of the feeder/platen cover with a cloth
which is wrung after being dampened in water, and then wipe them clean with a
soft, dry cloth.
which is wrung after being dampened in water, and then wipe them clean with a
soft, dry cloth.
1
2
1. Clean the platen glass.
2. Clean the underside of the
2. Clean the underside of the
feeder/platen cover.
If stains won’t come out, use detergent instead of water.