Netgear M7300-24XF (XSM7224S) - ProSAFE 24-port, 10 Gigabit Stackable L2+ Managed Switch Guía De Instalación

This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste 

Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union, 

this product should be treated and recycled in accordance with the laws of your jurisdiction 

implementing the WEEE Directive.

©2010 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered trademarks of 

NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or 

registered trademarks of their respective holders. Information is subject to change without notice. 

Use this IP value to log in to the switch (see 

).

By default, the switch is configured as a DHCP client to obtain its IP address from a 
DHCP server in the connected network. You must access the switch from the serial 
console port.

Make sure that the switch is connected to a DHCP server.

Find the switch IP address assigned by the DHCP server.
After locating the switch IP address:

User:admin
Password:
(XMS7224S) >ezconfig

NETGEAR EZ Configuration Utility
--------------------------------
Hello and Welcome!
This utility will walk you thru assigning the IP address for the switch
management CPU. It will allow you to save the changes at the end. After
the session, simply use the newly assigned IP address to access the Web
GUI using any public domain Web browser.

Admin password not defined. Do you want to change the password? (Y/N/Q)  n

The 'enable' password required for switch configuration via the command
line interface is currently not configured. Do you wish to change it (Y/N/Q)?  n

Assigning an IP address to your switch management

Current IP Address Configuration
--------------------------------

IP Address Assignment Mode: DHCP
IP Address: 0.0.0.0
Subnet mask: 0.0.0.0

Would you like to assign an IP address now? (Y/D/N/Q/?)? y
IP Address: 10.10.10.1
Network mask: 255.255.255.0

Do you want to assign switch name and location information (Y/N/Q)?  n
There are changes detected, do you wish to save the changes permanently (Y/N)?  y

The configuration changes have been saved successfully. 
Please enter 'show running-config' to see the final configuration. 

Thanks for using EzConfig! 

a.  Perform steps 1 through 3 of the procedure 

b.  Type the

  show network 

command and press Enter. A screen will 

display that shows the active switch IP address.

c.   Use this IP address to login to the switch through its Web Management 

interface (see 

).

Use the appropriate IP address for your configuration to manage your switch 
through its Web interface.

Type http://<ipaddress> into the URL window of your browser. A screen 

similar to the following, will display.

Type admin for the username and leave the password field blank.

Click Login. The Management screen will display. 

You can now navigate from this point to configure your switch.

Thank you for selecting NETGEAR products. 

After installing your device, locate the serial number on the label of your product and 
use it to register your product at 

. Registration is 

required before you can use our telephone support service. Registration via our 
website is strongly recommended.

Go to 

 for product updates and Web support. For 

Warranty and Regional Customer Support information, see the Resource CD that 
came with your product.

For complete DoC please visit the NETGEAR EU Declarations of Conformity 
website at: 

XSM7224S_IG 10Nov10.fm  Page 2  Wednesday, November 10, 2010  9:52 AM