Netgear M4300-12X12F (XSM4324S) - Stackable Managed Switch with 24x10G including 12x10GBASE-T and 12xSFP+ Layer 3 Manual De Hardware
Installation
35
Managed Stackable Switch Series M4300
•
Rack-mounting kit:
-
The half-width models include a long bracket, regular (short) bracket, and screws.
The kit also includes two inside and two outside middle mounts, which allow you
to install two half-width switches in a single rack space.
The kit also includes two inside and two outside middle mounts, which allow you
to install two half-width switches in a single rack space.
-
The full-width models include two regular (short) brackets and screws.
•
Rubber footpads for tabletop installation
•
Quick installation guide
•
Resource CD with the following manuals and software:
-
Software setup manual
-
CLI manual
-
Software administration guide
-
This hardware installation guide
-
The driver for use with the USB console cable
5.
If any item is missing or damaged, contact your local NETGEAR reseller for replacement.
Step 4: Install the Switch
You can install the switch on a flat surface or mount it in a standard 19-inch
(48.26-centimeter) network equipment rack. You can install a single half-width switch (model
M4300-8X8F, M4300-12X12F or M4300-24X) in a single rack space. You can also install two
half-width switches (model M4300-8X8F, M4300-12X12F, M4300-24X, or a combination of
models) in a single rack space, that is, you can install these half-width switches next to each
other.
(48.26-centimeter) network equipment rack. You can install a single half-width switch (model
M4300-8X8F, M4300-12X12F or M4300-24X) in a single rack space. You can also install two
half-width switches (model M4300-8X8F, M4300-12X12F, M4300-24X, or a combination of
models) in a single rack space, that is, you can install these half-width switches next to each
other.
Install the Switch on a Flat Surface
The switch ships with four self-adhesive rubber footpads. The rubber footpads cushion the
switch against shock and vibrations. They also provide ventilation space between stacked
switches.
switch against shock and vibrations. They also provide ventilation space between stacked
switches.
To install the switch on a flat surface:
Stick one rubber footpad on each of the four concave spaces on the bottom of the switch.
Install a Full-Width Switch in a Rack
To install the switch in a rack, you need the 19-inch rack-mount kit supplied with the switch.
To install a full-width switch in a rack:
1.
Attach the supplied mounting brackets to the side of the switch.
2.
Insert the screws provided in the rack-mount kit through each bracket and into the bracket
mounting holes in the switch.
mounting holes in the switch.