Netgear GSM7224R - ProSAFE 24-Port Gigabit L2 Managed Switch with Static Routing Prospecto
Version 1.0
ENABLE PASSWORD
Exit the Config mode with the Exit
command
command
Use CTRL+Z keys to exit the Privileged
EXEC mode (#)
EXEC mode (#)
Type the enable password command to
enter the password mode
enter the password mode
Enter the old password (in this case press
enter as there is no old password)
enter as there is no old password)
Enter and Confirm the new password
Save the configuration and reload the switch
Before the changes can take place the switch will need rebooting. This will require the
configuration to be saved before power cycling, to avoid the changes to be lost.
configuration to be saved before power cycling, to avoid the changes to be lost.
SAVE THE CONFIGURATION
Enter the Privileged EXEC mode using
en or enable
en or enable
Save the configuration using the
command copy system-running
nvram:startup-config
command copy system-running
nvram:startup-config
Enter Y when prompted
➑
The configuration is now saved
➑