Craftsman 13B226JD299 Manual De Usuario
20
SERVICE AND MAINTENANCE
WARNING
If the engine has been recently run, the engine, muffler and surrounding
metal surfaces will be hot and can cause burns to the skin. Exercise caution
to avoid burns.
metal surfaces will be hot and can cause burns to the skin. Exercise caution
to avoid burns.
WARNING
Before performing any maintenance or repairs, disengage the PTO (Blade
Engage Lever), engage the parking brake, stop the engine and remove the
key to prevent unintended starting.
Engage Lever), engage the parking brake, stop the engine and remove the
key to prevent unintended starting.
WARNING
Before performing any type of maintenance/service, disengage all controls
and stop the engine. Wait until all moving parts have come to a complete
stop. Disconnect spark plug wire and ground it against the engine to prevent
unintended starting. Always wear safety glasses during operation or while
performing any adjustments or repairs.
and stop the engine. Wait until all moving parts have come to a complete
stop. Disconnect spark plug wire and ground it against the engine to prevent
unintended starting. Always wear safety glasses during operation or while
performing any adjustments or repairs.
Follow the maintenance schedule given below. This chart describes service
guidelines only. Use the Service Log column to keep track of completed
maintenance tasks.
To locate the nearest Parts & Repair Service Center or to schedule service,
guidelines only. Use the Service Log column to keep track of completed
maintenance tasks.
To locate the nearest Parts & Repair Service Center or to schedule service,
simply call 1-888-331-4569.
MAINTENANCE SCHEDULE
Interval
Item
Service
Service Log
Before Each Use
1.
Engine oil level
2.
Air Filter
3.
Muffler area and controls
1.
Check
2.
Clean/Replace
3.
Clean
In the First Five Hours
1.
Engine Oil
1.
Change
Every 10 Hours
1.
Hood/ Dash air vents
2.
Battery terminals
3.
Deck spindle and idler bracket
1.
Clean
2.
Clean
3.
Lubricate
Every 25 hours
1.
Air filter’s precleaner*
2.
Air filter*
3.
Mid-steering arms, pivot shafts,
rack and axles
rack and axles
4.
Front wheel bearings
1.
Clean
2.
Clean
3.
Lubricate
4.
Lubricate
Every 50 hours
1.
Engine oil/ Oil filter
2.
Muffler
1.
Change/Replace
2.
Check
Annually
1.
Air filter
2.
Air filter’s pre-cleaner
3.
Spark plug
4.
Air cooling system*
5.
Fuel filter
6.
Steering Gears
7.
Rear Wheels
1.
Replace
2.
Replace
3.
Replace
4.
Clean
5.
Replace
6.
Clean
7.
Remove and grease axles
Before Storage
1.
Hood/ Dash air vents
2.
Battery terminals
3.
Mid steering arms, pivot shafts,
and axles
and axles
4.
Front wheel bearings
5.
Deck spindle and idler bracket
6.
Pedal pivot points
1.
Clean
2.
Clean
3.
Lubricate
4.
Lubricate
5.
Lubricate
6.
Lubricate
*Service more frequently under dusty conditions.