Craftsman 30383 Manual De Usuario

12 ― English

Lines will not feed when 
used as per instructions.

1. Lines have become stuck 
together due to heat or 
storage time.

1. Unplug trimmer. Open spool cover. Remove 
spool. Unwind line and then rewind onto spool.

2. Not enough line present in 
spool.

2. Unplug trimmer. Open spool cover. Remove spool 
and replace with new line or new spool assembly as 
per instructions in this manual.

3. Lines are tangled on spool.

3. Unplug trimmer. Open spool cover. Remove 
spool. Unwind and remove tangled line. Rewind line 
as per instructions in this manual.

Grass wraps around 
drive shaft housing and 
line head.

1. Cutting tall grass at ground 
level.

1. Cut tall grass from the top down to prevent 
wrapping.

Motor fails to start 
when switch trigger is 
depressed.

1. Power cord is not plugged 
in or connection is loose.

1. Plug in the power cord.

2. Household circuit breaker 
is tripped.

2. Check circuit breaker.

3. Extension cord may be 
faulty.

3. Try another extension cord or connect into 
another wall receptacle socket on a different circuit.

If your line trimmer does not seem to operate properly, 
fi rst consult the Troubleshooting Table below.
If the solution to your trimmer problem is not found in 
the Troubleshooting information, take the trimmer to 
a qualifi ed service dealer for inspection and possible 
repair.

   

Before proceeding, switch off 

and unplug.