Craftsman 30376 Manual De Usuario

10 ― English

UNPACKING
This product requires assembly.
■ Carefully remove the product and any accessories 

from the box. Make sure that all items listed in the 

packing list are included.

■ Inspect the product carefully to make sure no 

breakage or damage occurred during shipping.
■ Do not discard the packing material until you have 

carefully inspected and satisfactorily operated the 

product.
■ If any parts are damaged or missing, do not operate 

the blower. Return it for replacement to the retailer from 

which it was purchased.

See Figure 2.
■ Slide blower tube forward until the tab on the blower 

housing clicks into the slots on the tube.
■ Insert the concentrator nozzle onto the blower tube  

to lock. (Concentrator nozzle is used to increase air 

flow in tight areas: flower beds, under decks, etc.).

See Figure 3-8.
■ Assemble the vacuum tube sections by aligning and 

sliding upper tube into the lower vacuum tube until the 

different size tabs have "set".
■ Open vacuum gate. (Fig. 3)
■ With gate open, align tabs on vacuum tube with 

opening inside gate. (Fig. 4 )
■ With assembled vacuum tube properly aligned, 

insert into aligned gate opening and using the latching 

gate lock, lock vacuum tube into place. Make certain 

the vacuum tube aligning tab is firmly "seated" before 

locking the latch. (Fig. 5)
■ Add collection bag by simply aligning the plastic 

connector sleeve on the bag to the blower exhaust.  

(Fig. 6)
■ While standing in the operating position adjust the 

length to fit the operator’s size. pull the tab to lengthen, 

pull the strap to shorten.(Fig. 7-8)

PACKING LIST
Blower / Vaccum
Blower Tube
Vacuum tubes
Concentrator nozzle
Collection Bag
Operator’s Manual

   

If any parts are damaged or 

missing do not operate this product until the parts are 

replaced. Use of this product with damaged or missing 

parts could result in serious personal injury.

   

Do not attempt to modify this 

product or create accessories not recommended 

for use with this product. Any such alteration or 

modification is misuse and could result in a hazardous 

condition leading to possible serious personal injury.

   

Do not connect to power supply 

until assembly is complete. Failure to comply could 

result in accidental starting and possible serious 

personal injury.

   

Do not use this product if any 

parts on the Packing List are already assembled to 

your product when you unpack it. Parts on this list are 

not assembled to the product by the manufacturer and 

require customer installation. Use of a product that 

may have been improperly assembled could result in 

serious personal injury.