Craftsman CLGT2412S-N Manual De Usuario

19 ― English

Line will not advance 

when using the auto-

feed head.

1. Line is welded to itself. 1. Lubricate with silicone spray.

2. Not enough line on 

spool.

2. Install more line. Refer to LINE 

REPLACEMENT section in this manual.

3. Line is worn too short.

3. Remove battery pack. Push advance 

button on spool head while pulling on line 

manually.

4. Line is tangled on 

spool.

4. Remove line from spool and rewind. 

Refer to LINE REPLACEMENT section in 

this manual.

Grass wraps around 

shaft and spool 

head.

1. Cutting tall grass at 

ground level.

1. Cut tall grass from the top down to 

prevent wrapping.

Motor fails to start 

when power switch 

is depressed.

1. Battery is not secure.

1. To secure the battery pack, make sure 

the tongue  of the battery pack aligns with 

the cavity in the housing and snaps into 

place.

2. Battery is not charged. 2. Charge the battery pack according to 

the instructions in this manual.