Craftsman CLHT2422S-N Manual De Usuario

12 ― English

BATTERY LED INDICATORS
Check the battery pack capacity by pressing 

the LED button. 
When the LED button is pressed, the number 

of illuminated lights indicates the state of 

battery pack capacity. See Table below.

SAFETY NOTES AND PRECAUTIONS
■ Do not disassemble the battery.
■ Keep away from children.
■ Do not expose the battery to water or salt 

water. You should place the battery in a cool 

and dry environment.
■ Do not place the battery in high-

temperature locations, such as fire or heater.
■ Do not reverse the positive terminal and the 

negative terminal of the battery.
■ Do not connect the positive terminal and 

the negative terminal of the battery to each 

other with any metal objects.
■ Do not knock or strike the battery, nor step 

on it.
■ Do not solder directly onto the battery or 

pierce the battery with nails or other edge 

tools.
■ In the event that battery leaks and fluid gets 

into your eyes, do not rub the eyes. Rinse 

well with water. Immediately discontinue use 

of the battery if it emits an unusual smell, 

feels hot, changes color, changes shape, or 

appears abnormal in any other way.

■ The intelligent charger ensures maximum 

battery life, because it measures the existing 

charge level of the battery and then charges 

with the required current and voltage. Charge 

battery fully before storage.
■ 

Technical Issue: a flashing red LED light 

on the charger indicates that battery pack has 

a charging problem or might be defective.
- One possible condition is the battery 

temperature is not within the charging 

temperature range of 23

o

F - 122

o

F or the 

charging current is too high. As soon as the 

permitted temperature and the charging 

current ranges are reached, the battery 

charger will automatically switch to charging.
- If the temperature range and charging 

current are correct and flashing red LED 

light continues, then remove and reinstall 

the battery pack. If the LED status repeats a 

second time, try to charge another identical 

battery. If the battery charges normally, 

dispose of the defective battery pack (see 

Environmentally Safe Battery Disposal 

section).
- If the flashing red light continues after 

installing the second battery, the charger may 

be defective. Replace with a new one.
■ After continuous or repeated charging 

cycles without interruption, the charger 

surface may become noticeably warm. This 

is normal and does not indicate a technical 

defect of the battery charger.
■ 

Green LED flashing rapidly indicates that 

the battery voltage is low, and that charging 

will only continue for about another 30 

minutes.

   

To avoid risk of fire, 

electric shock, or electrocution：
■ Do not use a damp cloth or detergent on 

the battery or battery charger.
■ Always remove the battery pack before 

cleaning, inspecting, or performing any 

maintenance on the product.

0%-25%

25%-50%

50%-75%

75%-100%

LED 

Button green

yellow

red