Craftsman 71321 Manual De Usuario

• 6 •

This battery charger is for use on a nominal 120 volt circuit. The plug must be 

plugged into an outlet that is properly installed and grounded in accordance with 

all local codes and ordinances. The plug pins must fit the receptacle (outlet). Do 

not use with an ungrounded system. 

NOTE: Pursuant to Canadian Regulations, 

use of an adapter plug is not allowed in Canada. Use of an adapter plug in the 

United States is not recommended and should not be used.

The use of an extension cord is not recommended. If you must use an 

extension cord, follow these guidelines:

• Pins on plug of extension cord must be the same number, size, and shape as 

those of plug on charger.

• Ensure that the extension cord is properly wired and in good electrical condition.

• Wire size must be large enough for the AC ampere rating of the charger, as 

specified below: 

 

Length of cord (feet):  25

50

100 150

AWG* size of cord:

18

18

16

14

*AWG-American Wire Gauge

Remove all cord wraps and uncoil the cables prior to using the battery charger. 

1. Hook attachment
2. Digital display
3. Display button
4. Charging/ 

Charged/Maintaining  

LED indicator

5. AC Power cord
6. Battery clamps

1

2

3

4

5

6