Craftsman 45-0330 Manual De Usuario

8

1.  At the beginning of each season, using a light 

machine oil, lubricate the latch, the latch pivot bolt, 
and the area of the axle where the draw bar tongue 
pivots .

2.  Grease or oil the wheel bearings periodically. Use 

automotive wheel bearing type grease or 20 weight 
oil.

3.  Check periodically for loose bolts.

4.  Keep tires filled to the recommended tire pressure of 

12-14 Lbs.

1.  Refer to the vehicle owners manual for instructions on 

safe operation on slopes. 

2.  Use the slope guide provided on page 11 of this 

manual to determine whether slope angle is too steep 
for safe operation. 

3.  For best handling and traction, distribute the weight of 

the load evenly in the cart. 

4.  Always test to make sure your tractor has adequate 

towing and braking capabilities whenever hauling a 
substantial amount of weight in your cart. Use extra 
caution when operating on slopes.

5.  To dump material from the cart, release the spring 

latch on the tongue by pulling the latch lock lever 
forward, away from the cart. The cart bed will then tilt 
backwards to empty its contents. After emptying, pull 
the front of the bed down toward the cart tongue until 
the latch snaps into place.

6.  The maximum towing speed for this cart is 10 m.p.h.

DO NOt EXCEED WEIGHt CaPaCIty OF Cart
(See the specifications on this page.)
One cubic foot of dirt weighs approximately 80 lbs.

tires: 

15" x 6" Pneumatic

axle: 

1" Dia. Steel

Capacity: 

Up to 750 Lbs. Max.

approx. Sh. Wt.  105 Lbs.