Craftsman SM2511RC Manual De Usuario

16

17

AMPERAGE (AMPS) – A measure 

of the flow of electric current. Higher 

ratings generally means the tool is 

suited for heavier use.

ARBOR LOCK – Allows the user to 

keep the blade from rotating while 

tightening or loosening the arbor bolt 

during blade replacement or removal.

BASE – Supports the table, holds 

accessories and allows for workbench 

or leg set mounting.

BEVEL LOCK HANDLE – Locks the 

miter saw at a desired bevel angle.
BEVEL SCALE – To measure the 

bevel angle of the saw blade 0° to 45° 

left.

CARBIDE TIPPED – Extremely hard 

steel pieces with sharp cutting edges 

fastened to cutting tools such as saw 

blades.

COVER PLATE SCREW – Loosen this 

screw and rotate the plate for access to 

the blade arbor bolt.

DOUBLE-INSULATED – A form of 

electrical protection featuring two 

separate insulation systems to help 

protect against electrical shock.

EXTENSION CORD – An electric cord 

used between power tools and outlets to 

extend the range of the tools. The more 

amerage your tool uses, the longer the 

distance, the larger the size of the wire 

needed in your extension cord.

EYE PROTECTION – Googles or 

spectacles intended to protect your 

eyes. Eye protection should meet the 

requirements of ANSI Z.87.1 (USA) or 

CSA Z94.3-M88 (Canada).

FACE SHIELD – An impact resistant 

shield that helps to protect your face 

from chips, sparks, small debris. 

Should only be used in conjunction with 

additional eye protection.

FENCE – Helps to keep the workpiece 

from moving when sawing. Scaled to 

assist with accurate cutting.

GUARD – Protective devise that forms 

a barrier between a hazardous object 

such as a blade, wheel or cutter and 

the operator.

HOLD-DOWN LATCH – Locks the 

miter saw in the lowered position for 

compact storage and transportation.

MANUAL – Booklet accompanying 

your power tool that describes the 

hazards and safe operation procedures, 

outlines basic tool operation, care and 

maintenance.

MITER HANDLE – Used to rotate the 

table, and to rotate the saw to a right or 

left cutting position.

MITER SCALE – Measures the miter 

angle of the saw blade. Positive stop 

index points have been provided at 0°, 

15°, 22.5°, 31.6° and 45° right and left. 

MOUNTING HOLES – To mount the 

miter saw to a stable surface.