Black & Decker Iron Manual De Instrucciónes

3

•  READ ALL INSTRUCTIONS BEFORE USING.
•  Only use iron for intended use. 
•  To avoid the risk of electric shock, do not 

immerse the iron in water or other liquids.

•  Always turn the iron to MIN setting before 

plugging in or unplugging from the outlet. 

Never pull on the cord to disconnect from 
the electrical outlet; instead grasp plug and 

pull to disconnect. 

•  Do not allow cord to touch hot surfaces. 

Let iron cool completely before putting 

away. Gently wind the cord back into the 
housing by pressing the cord reel button 

when storing.

•  Always disconnect iron from electric outlet 

before filling with or emptying water, 
cleaning, and when not in use. 

•  Do not operate the iron if it has been 

dropped, if there are visible signs of 
damage to the iron or its cord, or if it’s 
leaking. To avoid the risk of electric shock, 
do not dissemble the iron; take it to a 

qualified service person for examination 

and repair, or call the appropriate toll-
free number on the cover of this manual. 
Incorrect reassembly can cause risk of 
electric shock when the iron is used. 

•  Close supervision is necessary for any 

appliance being used by or near children. 
Do not leave iron unattended when 
plugged in or on an ironing board. 

•  Burns can occur from touching hot metal 

parts, hot water, or steam. Use caution 
when you turn the iron upside down - there 
may be hot water in the reservoir. Avoid 

rapid movement of iron to minimize hot 
water spillage. 

•  The iron must be used and rested on a 

stable surface. 

•  When placing the iron on its stand, ensure 

that the surface on which the stand is 
placed is stable.

•  This appliance is not intended for use by 

persons (including children) with reduced 
physical, sensory, or mental capabilities, 

or lack of experience and knowledge, 
unless they have been given supervision or 
instruction concerning use of the appliance 
by a person responsible for their safety.

•  Children should be supervised to ensure 

that they do not play with the appliance. 

SPECIAL INSTRUCTIONS
•  To avoid circuit overload, do not operate 

another high wattage appliance on the 

same circuit.

•  If an extension cord is absolutely 

necessary, a minimum 10-ampere cord 
should be used. Cords rated for less 
amperage can result in a risk of fire or 
electrical shock due to overheating. Care 
should be taken to arrange the cord so that 
it cannot be pulled or tripped over. 

When using your iron, basic safety precautions should  

always be followed, including the following:

This appliance has a polarized plug (one blade 
is wider than the other). To reduce the risk of 
electric shock, this plug is intended to fit into 
a polarized outlet only one way. If the plug 
does not fit fully into the outlet, reverse the 
plug. If it still does not fit, contact a qualified 
electrician. Do not attempt to modify the plug 
in any way.  

Warning: This appliance is equipped with a 
tamper-resistant screw to prevent removal 
of the outer cover. To reduce the risk of fire 
or electrical shock, do not attempt to remove 
the outer cover. There are no user-serviceable 
parts inside. Repair should be done only by 
authorized service personnel. 
Note: If the power supply cord is damaged, in 
order to avoid a hazard, it should be replaced 
by qualified personnel or in Latin America by 
an authorized service center. 

SAFETY FEATURES