Zanussi ZOD35511DX Manual De Usuario

Refer to Safety chapters.

Remove all accessories and removable shelf

supports from the appliance.

Refer to "Care and cleaning"

chapter.

Clean the appliance and the accessories before

first use.

Put the accessories and the removable shelf

supports back to their initial position.

You must set the time before you operate the

oven.

Only the top oven works without the

set time.

The indicator for the Time of day function

flashes when you connect the appliance to the

electrical supply, when there was a power cut

or when the timer is not set.

Press the   or   button to set the correct

time.

After approximately five seconds, the flashing

stops and the display shows the time of day you

set.

You cannot change the time of day if
the Duration 

 or End 

 function

operates.

Press   again and again until the indicator for

the Time of Day function flashes.

To set a new time, refer to "Setting the time".

Preheat the empty appliance to burn off the

remaining grease.

Preheat the two ovens. Heat up one

oven at a time.

Set the functions listed below, if

applicable.

1. Set the function   and the temperature to

250ºC.

Let the appliance operate for 1 hour.

2. Set the function   and the temperature to

250ºC.

Let the appliance operate for 15 minutes.

3. Set the function   and the temperature to

250ºC.

Let the appliance operate for 15 minutes.

Accessories can become hotter than usual. The

appliance can emit an odour and smoke. This is

normal. Make sure that the airflow is sufficient.

Refer to Safety chapters.