Zanussi ZWF01483W Manual De Usuario

WARNING! Make sure that the

temperature is more than 0°C before

you use the appliance again. The

manufacturer is not responsible for

damages caused by low temperatures.

WARNING! Refer to Safety chapters.

INTRODUCTION
The appliance does not start or it stops during

operation.
First try to find a solution to the problem (refer to

the table). If the problem persists, contact the

Authorised Service Centre.
With some problems, the acoustic signals

code:
•

 - The appliance does not fill with water

properly.

•

 - The appliance does not drain the water.

•

 - The appliance door is open or not

closed correctly. Please check the door!

If the appliance is overloaded,

remove some items from the drum

and/or keep pressed the door and
push the 

 button at the same

time until the indicator 

 stops

flashing (see the picture below).

•

 - The mains supply is unstable. Wait until

the mains supply is stable.

•

 - No communication between electronic

elements of the appliance. Switch off and

switch on again.

WARNING! Deactivate the appliance

before you do the checks.

The programme does not

start.

• Make sure that the mains plug is connected to the mains socket.

• Make sure that the appliance door is closed.

• Make sure that there is not a damaged fuse in the fuse box.

• Make sure that the Start/Pause has been pressed.

• If the delay start is set, cancel the setting or wait for the end of

countdown.

• Deactivate the Child Lock function if it is on.