Cisco Cisco ONS 15454 SONET Multiservice Provisioning Platform (MSPP) Guía De Instalación
Corporate Headquarters:
Copyright © 2003 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Installing the Plastic Lower Backplane Cover on
the Cisco ONS 15454
the Cisco ONS 15454
Product Number: Kit 15454-53-2333=
This document describes how to remove an existing metal backplane cover and attach the plastic
backplane cover on the Cisco ONS 15454.
This document describes how to remove an existing metal backplane cover and attach the plastic
backplane cover on the Cisco ONS 15454.
Caution
Always use an electrostatic discharge (ESD) wristband when working with a powered ONS
15454. Plug the wristband cable into the ESD jack located on the lower-right outside edge
of the shelf assembly.
15454. Plug the wristband cable into the ESD jack located on the lower-right outside edge
of the shelf assembly.
System Requirements
Cisco ONS 15454
#2 Phillips screwdriver
Install the Plastic Lower Backplane Cover
Step 1
Unscrew the five retaining screws that hold the metal cover in place.
Step 2
Grasp the metal cover on each side.
Step 3
Gently pull the metal cover away from the backplane.
Step 4
Place the plastic cover against the shelf assembly and align the screw holes on the cover and the shelf
assembly.
assembly.